Sharp LC-26DV20U Operation Manual - Page 55
an optional - wall mount
UPC - 074000363410
View all Sharp LC-26DV20U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Appendix Before detaching (or attaching) stand, unplug the AC cord from the AC INPUT terminal. • Do not remove the stand from the TV/DVD unless using an optional wall mount bracket to mount it. Before attachingldetaching stand * Before performing work make sure to turn off the TV/DVD. * Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged. r 1 t"_ hex key 2 Soft cushion Unfasten the four screws used to secure the stand in place. Detach the stand from the TV/DVD. (Hold the stand so it will not drop from base area.) the edge of the • To attach the stand, perform the above steps in reverse order. • Installing the TV/DVD requires special skill that should only be performed by qualified service should not attempt to do the work themselves, SHARP bears no responsibility for improper that results in accident or injury. personnel. mounting Customers or mounting Using an optional bracket to mount the TV/DVD • You can ask a qualified service professional about using an optional AN-26AG1 bracket to mount the TV/DVD to the wall, • Carefully read the instructions that come with the bracket before beginning work, Hanging on the wall Wall mount bracket. (See the bracket instructions for details.) About setting the TV/DVD angle Angle of TV/DVD : up to 20 ° I Vertical mounting Angular mounting DETACH THE CABLE CLAMP ON THE REAR OF THE TV/DVD WHEN USING THE OPTIONAL MOUNT BRACKET. (_= 55