Sharp MX-M363N MXM363N|MXM453N|MXM503N Operation Manual - Page 224
Place 12 x 18 A3W paper in the, bypass tray., Press the [START] key.
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
COPIER Place 12" x 18" (A3W) paper in the bypass tray. 4 Pull out the extension tray, adjust the guides to the width of 12" x 18" (A3W) paper, and place the paper in the bypass tray. After loading the paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 2-38). Press the [START] key. Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 5 then touch the [Read-End] key. To cancel scanning and copying... Press the [STOP] key ( ). • To use this function, one of the following output devices must be installed; Exit tray unit, Finisher, Finisher (large stacker), Saddle stitch finisher • The original must be placed on the document glass. • The copy ratio is 100% when this function is used. The ratio cannot be changed. • The staple, paper folding, and punch function cannot be used. To cancel 11x17 Full Bleed... Touch the [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted. 2-112 Contents