Sharp MX-M363N MXM363N|MXM453N|MXM503N Operation Manual - Page 837
Changing to a Standard TCP/IP Port
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 837 highlights
CHANGING THE PORT X Changing to a Standard TCP/IP Port If the machine is being used on an IPv6 network, change the port to a port created using the operating system's "Standard TCP/IP Port". 1 Follow steps 1 to 3 of "CHANGING THE PORT" (page 29). 5 Select [Custom] and click the [Settings] button. 2 Select [Standard TCP/IP Port] and then click the [New Port] button. 3 Click the [Next] button. 4 Enter the machine's IPv6 address in [Printer Name or IP Address] and click the [Next] button. 6 Configure the port settings. (2) (3) (1) (1) Select [LPR]. (2) Enter [lp]. (3) Click the [OK] button. 31
31
CHANGING THE PORT
Changing to a Standard TCP/IP Port
If the machine is being used on an IPv6 network, change the port to a port created using the operating system's
"Standard TCP/IP Port".
1
Follow steps 1 to 3 of "CHANGING THE
PORT" (page 29).
2
Select [Standard TCP/IP Port] and then
click the [New Port] button.
3
Click the [Next] button.
4
Enter the machine's IPv6 address in
[Printer Name or IP Address] and click
the [Next] button.
5
Select [Custom] and click the [Settings]
button.
6
Configure the port settings.
(1)
Select [LPR].
(2)
Enter [lp].
(3)
Click the [OK] button.
(2)
(3)
(1)