Sharp MX-M363N MXM363N|MXM453N|MXM503N Operation Manual - Page 394
PRINTING A PASSWORD-PROTECTED FAX, Hold Setting For Received Data Print
![]() |
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 394 highlights
FACSIMILE PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print) "Hold Setting for Received Data Print" can be enabled in the system settings (administrator) to have faxes received to memory without being printed. To print the faxes, a password must be entered. When this function is used, a password entry screen appears in the touch panel when a fax is received. Received data is stored. Enter password via the 10-key. Cancel When the previously programmed 4-digit password is entered with the numeric keys, printing begins. The [Cancel] key can be touched to close the password entry screen. If this is done, the data in memory key ( ) will blink in the touch panel. The password entry screen will reappear when you touch the blinking key ( ) or change modes. When "Received Data Image Check Setting" is enabled in the system settings (administrator), a password can be entered to display the received data list screen. If you wish to check an image before printing it, continue from step 1 on the next page. • The received faxes will be retained in memory regardless of whether they were received automatically or manually. • If "Fax Data Receive/Forward" is executed in the system settings to forward received faxes to another machine, faxes retained in memory will also be forwarded. At that time, the same password entry screen as for printing will appear. Forwarding will not take place unless the password is entered. System Settings (Administrator): Hold Setting for Received Data Print Enable this setting to have received faxes retained in memory until a password is entered. This setting is also used to program the password. 4-61 Contents
![](/manual_guide/products/sharp-mxm363n-mxm363nmxm453nmxm503n-operation-manual-3411bbc/394.png)