Sharp MX-M363N MXM363N|MXM453N|MXM503N Operation Manual - Page 503
Sending An Image In Usb Memory Mode
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 503 highlights
SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. • Use a FAT32 USB memory with a capacity of no more than 32 GB. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below. Connect the USB memory to the USB connector (Type A) on the machine. 1 Original size Place the original. detector Do not place any objects under the original size detector. 1 Closing the automatic document feeder with an object underneath may damage the original size detector plate and prevent correct detection of the document size. • When placing the originals, orient them as shown below. Originals Document feeder tray Place the original face up. Portrait orientation* Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. 2 1 1 1 1 Landscape orientation 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4. • Place 5-1/2" x 8-1/2" (A5) size originals in portrait (vertical) orientation ( ). If placed in landscape (horizontal) orientation ( ), an incorrect size will be detected. For a 5-1/2" x 8-1/2"R (A5R) size original, enter the original size manually. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 5-35 Contents