Sharp MX-M363N MXM363N|MXM453N|MXM503N Operation Manual - Page 763
Paper misfeed in the finisher
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 763 highlights
(8) Paper misfeed in the bypass tray Remove the misfed paper. TROUBLESHOOTING (12) Paper misfeed in the finisher Open the front cover. (9) Paper misfeed in tray 1 to tray 4 (side) The misfeed may have occurred inside the machine. Check carefully and remove it. While pressing the lever over to the left, slide the finisher to the left until it stops. Turn roller rotating knob in the direction of the arrow to remove the misfed paper. (10) Paper misfeed in the transport area Lower the lever in the direction of the arrow to remove the misfed paper. Make sure that there is no misfed paper in the machine. (11) Paper misfeed in tray 1 to tray 4 (in the tray) Before pulling the tray out, open the right cover and check if there is a paper misfeed. If you pull the tray out without checking, you may tear misfed paper and make it more difficult to remove the pieces that remain in the machine. ☞ (9) Paper misfeed in tray 1 to tray 4 (side) (13) Paper misfeed in the output area Remove the misfed paper. 8-5 Contents