Sharp MX-M450NA Administration Guide - Page 11
Job log control, Energy save
View all Sharp MX-M450NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
GENERAL SETTINGS Job log control Clear all job log data The machine keeps a log of the jobs it has run. The job log can be used to check general use of the machine. The job log can be written to your computer in CSV format using a Web browser. This setting is used to clear the job log. There is normally no need to use the program. Energy save "Energy save" provides the following settings to reduce your power costs. From an environmental perspective, this also helps conserve natural resources and reduce pollution. Toner save in printer mode Toner save in copy mode Auto power shut-off Auto power shut-off timer Preheat mode setting Toner save in printer mode Printing in the toner save mode will reduce toner consumption. If toner save is set, black solid areas will be printed as halftone. (This setting is effective only for printing without use of the dedicated printer driver. If the printer driver is used, the printer driver setting will override this setting.) Print data Example of print in the toner save mode Toner save in copy mode This setting is used to save toner in copy mode. This setting functions the same way as toner save in printer mode. Auto power shut-off If the machine is not used for a set duration of time, auto power shut-off activates to enable maximum conservation of energy. This function allows you to reduce power costs, and at the same time helps conserve natural resources and reduce pollution. This setting is used to enable or disable auto power shut-off. To disable the function, remove the checkmark from the checkbox. Use this setting if you prefer that auto power shut-off does not operate. NOTE If you prefer that auto power shut-off activates as little as possible, it is recommended that you try lengthening the time setting after which activation takes place rather than disabling the function altogether. (The time setting is changed using the following "AUTO POWER SHUT-OFF TIMER" setting.) Auto power shut-off timer This setting is used to configure the time after which auto power shut-off activates. The time can be set to as long as 240 minutes in increments of one minute. NOTE We suggest you set the most appropriate time according to your usage pattern. This time setting is not effective when auto power shut-off mode is disabled using the "Auto power shut-off" setting. Preheat mode setting If the printer is not used for the duration of time configured in this setting after printing is finished, it will enter preheat mode. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution. Select the most suitable setting to match your pattern of use of the printer. The time can be set to as long as 240 minutes in increments of one minute. (Preheat mode cannot be disabled.) 9