Sharp MX-M450NA Administration Guide - Page 13
Device control
View all Sharp MX-M450NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GENERAL SETTINGS Disabling switching of display order This setting is used to disable the function that changes the key display order each time a selected tab is touched on a screen that is divided into tabs, including the screens for selecting the user name and folder for the "SCAN TO HDD" and "FILE" functions, and the address book screen of image send mode. This does not affect the function that changes the order of display of files in document filing folders. Disabling of clock adjustment This setting is used to prohibit changes to the clock adjust setting. When this setting is enabled, "Clock" in the system settings cannot be used. To adjust the date and time, this setting must first be disabled (remove the checkmark). Device control Use these settings when a peripheral device on the machine has failed or when you wish to temporarily disable a device. These settings can also be used to change certain device function settings as needed to suit the needs of your workplace. "Device control" consists of the following settings: Original size detector setting Disabling of document feeder Disabling of duplex Disabling of stapler Disabling of punch Disabling of optional paper drawer Disabling of finisher Disabling of mail-bin stacker Disabling of covers/inserts mode Saddle stitch position adjust High speed stacking Rotated output Auto paper selection setting Optimization of a hard disk Original size detector setting This setting is used to select the standard original sizes that are detected by the original size detection function. Select one of the four groups indicated below. The factory default setting is "INCH-1 (AB-1)". Original size detection by the document glass can also be disabled. Detectable original sizes Group Document feeder tray (for automatic document feeder) Document glass 11" x 17", 8-1/2" x 14", 1 INCH-1 8-1/2" x 11", 8-1/2" x 11"R, A3, A4 5-1/2" x 8-1/2" 11" x 17", 8-1/2" x 13", 2 INCH-2 8-1/2" x 11", 8-1/2" x 11"R, A3, A4 5-1/2" x 8-1/2" 3 AB-1 A3, A4, A4R, A5, B4, B5, B5R 11" x 17", 8-1/2" x 11", 216x330 4 AB-2 A3, A4, A4R, A5, B5, B5R, 216x330 11" x 17", 8-1/2" x 11", B4 If "CANCEL DETECTION AT DOCUMENT GLASS" is set, originals will be regarded as EXTRA for all copier functions and no original size will be displayed. Disabling of document feeder This setting is used to prevent use of the automatic document feeder when it malfunctions. In this case, scanning can still be performed using the document glass. Disabling of duplex This setting is used to disable duplex printing when the duplex module malfunctions. When this settings is enabled, only one-sided printing can be performed. Disabling of stapler This setting is used to disable stapling when the stapler unit of the finisher or the saddle stitch finisher malfunctions. Disabling of punch Use this setting when you wish to prohibit punching or when the punch unit of the finisher or saddle stitch finisher has failed. Disabling of optional paper drawer This setting is used to disable use of the stand/3 x 500 sheet paper drawer or stand/MPD & 2000 sheet paper drawer when it malfunctions. Disabling of finisher Use this setting when you wish to prohibit use of the finisher or saddle stitch finisher, or when either has failed. Disabling of mail-bin stacker This setting is used to disable use of the mail-bin stacker when it malfunctions. Disabling of covers/inserts mode Use this setting to prohibit the use of covers/inserts mode. 11