Sharp MX-M450NA Operation Manual - Page 91
PLACING ORIGINALS, Using the automatic document feeder, Using the document glass
View all Sharp MX-M450NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
PLACING ORIGINALS ■ Using the automatic document feeder 1 Open the document cover, make sure that an original has not been left on the document glass, and then gently close the document cover. ■ Using the document glass Open the document cover, place the original face down on the document glass, and then gently close the document cover. To make a copy of a small original such as a postcard, use the [PAPER SELECT] key to select the desired paper Original size detector size. 2 Adjust the original guides to the size of the originals. NOTES ● After placing the original, be sure to close the document cover. If left open, parts outside of the original will be copied black, causing excessive use of toner. ● Do not place any objects under the original size 4 detector, because they may damage it or the original size may not be detected properly. 3 Place the originals face down in the document feeder tray. Place the originals face down. Insert the originals all the way into the document feeder. The stack height must not be higher than the indicator line (maximum of 50 pages). Original scale mark Original scale mark 5½ x 8½ or A5 8½x11 or A4 8½x14 or B4 11x17 or A3 8½x11R or A4R ●Align the corner of the original with the tip of the arrow mark on the document glass scale. ●Place the original in the appropriate position for its size as shown above. NOTE Original size detection function One of the four groups of standard original sizes shown below can be selected for detection by the original size detection function. The factory default setting is "INCH-1". The setting can be changed using "ORIGINAL SIZE DETECTOR SETTING" in the administrator settings. Detectable original sizes Group Document feeder tray (for automatic document feeder) Document glass 1 INCH-1 11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" Document glass + A3, A4 2 INCH-2 11" x 17", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" Document glass + A3, A4 3 AB-1 A3, A4, A4R, A5,B4, B5, B5R Document glass + 11" x 17", 8-1/2" x 11", 216x330 4 AB-2 A3, A4, A4R, A5,B5, B5R, 216x330 Document glass + 11" x 17", 8-1/2" x 11", B4 4-3