Sharp PG-M25X PGM25X Operation Manual - Page 93
Setting On-screen Display
View all Sharp PG-M25X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
4 Press to move the inset pic- ture. • The inset picture will be moved to the inset picture frame. Note • The inset picture can only be displayed with composite video (NTSC/PAL/ SECAM) or S-Video signal. • The Freeze function works only with the inset picture, when the Pict in Pict mode is in operation. When the signal entered into INPUT 1 is as follows, Pict in Pict does not work: • With a resolution that exceeds SXGA. • When the input signal is 480I, 480P, 720P or 1080I. • When the input signal has changed to the Interlace mode using RGB signals. • When the picture display mode is set to "DOT BY DOT". • When no signals are sent to INPUT 1, or when the resolution or refresh rate (vertical frequency) is changed. • You can use on the GyroRemote or on the projector to change the inset picture. Setting On-screen Display This function allows you to turn on or off the on-screen messages. When setting " Level B" in "OSD Display", the input mode display (e.g. "INPUT 1") will not appear, even if the INPUT button is pressed. Selected Item Normal Level A Level B Description All On-screen Displays are displayed. Input/Freeze/Enlarge/Auto Sync/Volume/AV Mute are not displayed. All On-screen Displays are not displayed. (except Menu, On-screen displays displayed when the LENS button is pressed, and warning displays (Power off/Temp./Lamp, etc.)) Easy to Use Functions Turning Off the On-screen Display Select "OSD Display" in the "Options (1)" menu ➝ For operating the menu screen, see pages 50 and 52. ➝ For operating the menu screen using the GyroRemote see pages 54 and 55. Note • Standby message in INPUT 4 will appear regardless of "OSD Display" level. -89 PG-M25X#E#p78_96.p65 89 02.4.29, 3:22 PM