Sharp PN-655RU PN-655RU Operation Manual - Page 37
Communication procedure
UPC - 074000046658
View all Sharp PN-655RU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Controlling the Monitor with a PC ENGLISH Communication procedure Basic operation When a command is sent from the PC to the monitor, the monitor operates according to the received command and sends a response message to the PC. Return code C1 C2 C3 C4 P1 P2 P3 P4 Command field (4 prescribed alphanumerical characters) Parameter field (4 character string comprised of: 0-9, +, -, space, ?) Example: VOLM0030 VOLM 30 (" " indicates a space.) * Be sure to input 4 characters for the parameter. Pad with spaces if necessary. Wrong: VOLM30 Right: VOLM 30 (" " indicates a space. " " is the return code (0DH, 0AH or 0DH).) When inputting a negative value, specify a numerical value in three digits. Example: AUTR-009 To use the six-digit command (MPOS), use a six-digit numerical value without spaces in between. Example: MPOS010097 If a command has "R" listed for "DIRECTION" in the "RS-232C command table" on page 42, the current value can be returned by using "?" as the parameter. Example: 1. If an ID number has not been set: VOLM???? ← From PC to monitor (How much is current volume setting?) 30 ← From monitor to PC (Current volume setting: 30) 2. If an ID number has been assigned (For example, ID number = 1) VOLM ? ← From PC to monitor (" " indicates a space.) 30 001 ← From monitor to PC (" " indicates a space.) When a command has been executed correctly OK Return code (0DH, 0AH) This is returned when execution of the command is finished. When a command has not been executed correctly* Return code * This is returned when there is no such command, or ERR (0DH, 0AH) when the command cannot be used in the current state of the monitor . * If communication has not been established for reasons such as a bad connection between the PC and monitor, nothing is returned (not even ERR). If execution of the command is taking some time WA I T If RS-232C is locked Return code (0DH, 0AH) With some commands, "WAIT" is returned as a return value. Wait for a moment, and OK or ERR will be returned. New commands cannot be received during this time, even if they are sent. Return code (0DH, 0AH) L OCKE D If RS-232C control has been locked with the operation lock (see page 32), LOCKED is returned as the returned value. 35 E