Sharp PN-K321 Operation Manual
Sharp PN-K321 Manual
 |
View all Sharp PN-K321 manuals
Add to My Manuals
Save this manual to your list of manuals |
Sharp PN-K321 manual content summary:
- Sharp PN-K321 | Operation Manual - Page 1
PN-K321 LCD MONITOR OPERATION MANUAL - Sharp PN-K321 | Operation Manual - Page 2
IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No.: Serial No.: U.S.A. ONLY - Sharp PN-K321 | Operation Manual - Page 3
user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: FCC Regulations and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of - Sharp PN-K321 | Operation Manual - Page 4
SHARP LCD product. To ensure safety and many years of trouble service life of your LCD product, please read the following precautions carefully before using the product. 1. Read instructions - All operating instructions must be read and understood before the product is operated. 2. Keep this manual - Sharp PN-K321 | Operation Manual - Page 5
mount brackets recommended by the manufacturer. • Only using furniture that can safely support the monitor. • Ensuring the monitor is not overhanging the edge of the supporting furniture. • Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the - Sharp PN-K321 | Operation Manual - Page 6
and shall be easily accessible. The Power Cord and AC adapter - Use only the power cord and AC adapter supplied with the monitor. - When handling the AC manual is English by way of example. - Illustrations in this manual may not exactly represent the actual product or display. - This manual - Sharp PN-K321 | Operation Manual - Page 7
between 32°F (0°C) and 104°F (40°C). Provide enough space around the monitor to prevent heat from accumulating inside. For the monitor in landscape orientation 7-7/8 [20] Unit: inch [cm] * • When installing the monitor in landscape orientation, you can attach the supplied horizontal - Sharp PN-K321 | Operation Manual - Page 8
24 RS-232C command table 26 Troubleshooting 30 Specifications 31 Mounting Precautions (For SHARP dealers and service engineers 36 Supplied Components If any component should be missing, please contact your dealer. Liquid Crystal Display Monitor: 1 Power cord: 1 AC adapter: 1 CD-ROM - Sharp PN-K321 | Operation Manual - Page 9
nFront view 1 Part Names 1. LCD panel 2. Power LED (See page 15.) nRear view 13 14 15 16 17 18 19 2 1 2 4 5 6 See page 12.) 10. AC input terminal (See page 13.) 11. Main power switch (See page 15.) 12. Antitheft hole ( ) 13. Power button ( ) (See page 16.) 14. Brightness adjustment button ( ) - Sharp PN-K321 | Operation Manual - Page 10
) as shown. Packing material (upper left) 5. Fasten the stand to the monitor with the supplied screws (M4 x 10 with washers) (x4). Use the supplied hex wrench. • Landscape Screw (M4 x 10 with washers) Front 2. While supporting the stand pedestal with your hand, fasten to the stand strut with - Sharp PN-K321 | Operation Manual - Page 11
easy to view. Approx. 5-29/32inch (15cm) Installing the stand (supplied) TIPS • The height cannot be adjusted in a vertical installation. • Approx.45° Caution • When moving the monitor, be sure to grasp only the frame. Grasping and applying pressure to the LCD panel may damage it. • Take care - Sharp PN-K321 | Operation Manual - Page 12
problems. • Do not use any cable that has a damaged or deformed terminal. Using such a cable may cause malfunctions. • Images may not be displayed monitor can be connected to a PC using the RS- 232C conversion cable (supplied) and a commercially available RS-232 straight cable to control the monitor - Sharp PN-K321 | Operation Manual - Page 13
and AC adapter supplied with the monitor. 1. Turn off the main power switch. 2. Connect the AC adapter (supplied) to the power cord (supplied). 3. Connect the AC adapter (supplied) to the AC input terminal. 4. Plug of the power cord (supplied) into the AC power outlet. 3 4 For power outlet 2 AC - Sharp PN-K321 | Operation Manual - Page 14
(small) Cable clamp (large) Cable Cable clamp attachment Cable clamp Cable attachment nStoring the cables The cables connected to the rear of the monitor can be bound using the cable clamp on the stand. • Landscape • Portrait Cable clamp (large) Cable clamp Cable attachment Caution • Do not - Sharp PN-K321 | Operation Manual - Page 15
the PC or playback device. Turning on the main power Turning power on/off Press the power button ( ) to turn the power ON/OFF. Power button ( ) Main power switch Power lamp status Green lit Off Orange lit Power LED Status of the monitor Power on Power off (Standby mode) Input signal waiting mode - Sharp PN-K321 | Operation Manual - Page 16
( ) Press this button to turn the power ON/OFF. 2,3. Brightness adjustment button ( / ) The brightness menu page 18.) Settings can be entered when the menu screen is displayed. 7. [INPUT/RETURN] button The input selection menu is displayed. Press the [VOL+/ ]/[VOL-/ ] buttons to select the - Sharp PN-K321 | Operation Manual - Page 17
at the number of panel pixels of the resolution of the input signal. TIPS • Using this monitor's screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the - Sharp PN-K321 | Operation Manual - Page 18
. Caution • Do not turn the main power switch off while the menu items are being displayed. Doing so may initialize the settings. nExample display 1 3 PICTURE SETUP MONITOR PbyP OTHERS PICTURE BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR ADJUSTMENT ADVANCED RESET 1920x1080 V: 60Hz - Sharp PN-K321 | Operation Manual - Page 19
changes it towards magenta. COLORS Adjusts the color intensity. SHARPNESS Adjusts the sharpness of the image. Some settings and images may cause vertical to the image. When the setting is different, images will be displayed with washed out blacks and compressed gradients. RESET Resets the values of - Sharp PN-K321 | Operation Manual - Page 20
resolution of 3840 x 2160 (50Hz/60Hz) in the DisplayPort input terminal, select MST (Multi-stream). Images may not be displayed properly with some video card combinations. nMONITOR MONITOR Select the installation direction of the monitor. LANDSCAPE............Landscape orientation PORTRAIT Portrait - Sharp PN-K321 | Operation Manual - Page 21
end of the screen. If the monitor is installed in the portrait orientation, POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode. SIZE Changes the screen size. (See page 17.) 4096 DISPLAY POSITION Sets the position where the image is displayed - Sharp PN-K321 | Operation Manual - Page 22
OFF.) DisplayPort - HDMI1 or HDMI2 HDMI1 - HDMI2 TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for - Sharp PN-K321 | Operation Manual - Page 23
on the monitor buttons. OFF....Enables operation. ON 1...Disables all operations other than turning power on/off and hardware error is detected, the power LED flashes in red and the screen displays a message: STATUS [xxxx]. LED When a hardware error is detected, the power LED flashes in red. 3. - Sharp PN-K321 | Operation Manual - Page 24
Connect the COM port on the PC (RS-232C connector) to the CONTROL terminal (RS-232C input terminal) on the monitor using the RS-232C conversion cable (supplied) and an RS232 straight cable (commercially available). Bind the RS-232C conversion cable with the cable clamp. CONTROL terminal (RS - Sharp PN-K321 | Operation Manual - Page 25
is no relevant command or when the command cannot be used in the current state of the monitor. • If communication has not been established for reasons such as a bad connection between the PC and monitor, nothing is returned (not even ERR). • "ERR" may be returned when a command cannot be received - Sharp PN-K321 | Operation Manual - Page 26
Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command field (See page 24.) Response (Returned value) "●" indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting. "○" indicates a command which cannot be used in - Sharp PN-K321 | Operation Manual - Page 27
Controlling the Monitor with a PC (RS-232C) PICTURE menu Function BRIGHT CONTRAST BLACK LEVEL TINT COLORS SHARPNESS COLOR COLOR MODE ADJUSTMENT WHITE BALANCE THRU PRESET Command Direction VLMP WR CONT WR BLVL WR TINT WR COLR WR SHRP WR BMOD WR CTMP - Sharp PN-K321 | Operation Manual - Page 28
menu Function Command Direction Parameter Reply Control/Response contents * MONITOR STDR WR 0-1 0-1 0: LANDSCAPE, 1: PORTRAIT ○ STANDBY MODE STBM WR 0-1 0-1 0: STANDARD, 1: LOW POWER ○ OFF IF NO OPERATION ATOF WR 0-1 0-1 0: OFF, 1: ON ○ PbyP menu Function Command Direction - Sharp PN-K321 | Operation Manual - Page 29
Controlling the Monitor with a PC (RS-232C) Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0 - ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF, 1:ON 1, 2:ON 2 ○ OSD DISPLAY LOSD WR 0-2 - Sharp PN-K321 | Operation Manual - Page 30
experiencing any problem with your display, before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Are the AC adapter and power cord properly connected? (See page 13.) • Is the main power switch off? (See page 15.) • Is the monitor in standby - Sharp PN-K321 | Operation Manual - Page 31
Specifications nProduct Specifications Model PN-K321 LCD component 32" Class [31-35/64 inch (80.1cm) diagonal] TFT LCD Max. resolution (pixels) 3840 x 2160 Max. colors Approx. 1.07 billion colors Pixel pitch 0.182 mm (H) × 0.182 mm (V) Viewing angle 176° right/left/up/down (contrast - Sharp PN-K321 | Operation Manual - Page 32
256] • Portrait *Adjustable (19-17/64~24-31/32 [489~634]) 17-3/8 [441] Unit: inch [mm] 29-17/32 [750] 31-1/32 [788] When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws. Note - Sharp PN-K321 | Operation Manual - Page 33
60Hz 72Hz 75Hz 56Hz 60Hz 72Hz 75Hz 60Hz 60Hz 70Hz 75Hz 75Hz 60Hz 75Hz 60Hz 60Hz 60Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 24Hz 25Hz 30Hz 50Hz 60Hz 24Hz 60Hz 60Hz by Dot, the image will be cut down to panel size then displayed. *3 Displays using multi-streaming. *4 The two HDMI input terminals both have 1920 - Sharp PN-K321 | Operation Manual - Page 34
50Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz 59.94Hz 60Hz 50Hz 59.94Hz 60Hz HDMI Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes nPower management This monitor conforms to VESA DisplayPort power management. nDDC (plug and play) The monitor supports the VESA DDC (Display Data Channel - Sharp PN-K321 | Operation Manual - Page 35
nDisplayPort input terminal pins (DisplayPort 20 pin) No. Function 1 MainLane 3- 2 Gnd 3 MainLane 3+ 4 MainLane 2- 5 Gnd 6 MainLane 2+ 7 MainLane 1- 8 Gnd 9 MainLane 1+ 10 MainLane 0- No. Function 11 Gnd 12 MainLane 0+ 13 Gnd 14 Gnd 15 Aux+ 16 Gnd 17 Aux- 18 Hot-plug detection - Sharp PN-K321 | Operation Manual - Page 36
) to 3/8 inch (10 mm) longer than the thickness of the mounting bracket. • Do not use an impact driver. • When moving the monitor, be sure to hold it with the unit bottom and the side of unit. Do not hold the LCD panel or corners. This may cause product damage, failure, or injury. • Do not - Sharp PN-K321 | Operation Manual - Page 37
PN-K321 Mu EN13A(1)
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
 |
 |
PN-K321
LCD MONITOR
OPERATION MANUAL