Sharp PN-K321 Operation Manual - Page 26

Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: *: Command field (See page 24.) W When the "Parameter" is set in the parameter field (See page 24.), the command functions as described under "Control/Response Contents". R The returned value indicated under "Reply" can be obtained by setting "????", " ?" or "???+" (repeater control) in the parameter field. (See page 24.) Parameter field (See page 24.) Response (Returned value) "●" indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting. "○" indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER. "-" indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting. Power control/Input mode selection Function POWER CONTROL Command Direction POWR W R Parameter 0 1 INPUT MODE SELECTION INPS W 0 9 10 12 13 14 15 R Reply Control/Response contents * Switches to standby mode. Returns from standby mode. 0 Standby mode ● 1 Normal mode 2 Input signal waiting mode Toggle change for input mode. Terminals not selected in INPUT SELECT cannot be selected. HDMI1 [AV] "ERR" when PC is selected for HDMI1 of INPUT SELECT. HDMI1 [PC] "ERR" when AV is selected for HDMI1 of INPUT SELECT. HDMI2 [AV] ● "ERR" when PC is selected for HDMI2 of INPUT SELECT. HDMI2 [PC] "ERR" when AV is selected for HDMI2 of INPUT SELECT. DisplayPort HDMI DUAL 9 HDMI1 [AV] 10 HDMI1 [PC] 12 HDMI2 [AV] 13 HDMI2 [PC] ● 14 DisplayPort 15 HDMI DUAL E 26