Sharp PN-V600 Operation Manual - Page 13
Multiple monitor connection, ■ Connection with video cable
View all Sharp PN-V600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting Peripheral Equipment TIPS • The length of the signal cables or surrounding environment may affect the image quality. • The screen may not display properly when using terminals other than PC DVI-D/AV DVI-D for the input mode. In this case, turn off the power to all the monitors connected in a daisy chain and then turn the power on again. • When connecting monitors in a daisy chain set AUTO INPUT CHANGE to OFF. • Video output is disabled in the following cases: When the power is turned off When the monitor is in input signal waiting mode 10. LAN terminal • You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network. 11. External speaker terminals • Be sure to use external speakers with an impedance of 6 Ω or greater and a rated input of at least 10 W. 1 2 3 Approx. 3-15/16 inch (10 cm) 1. Attach a speaker cable core (included with the PN-ZB02) to the end of the speaker cable connected to the monitor. 2. While pushing the tab, insert the tip of the cable. 3. Release the tab. TIPS • Be sure to connect the + and - terminals and the left and right speakers properly. • Avoid short circuiting the + and - terminals. 12. Audio1 input terminals 13. Audio2 input terminals • Set the audio input terminal to be used in each input mode in AUDIO SELECT on the OPTION menu. 14. PC RGB input terminals • Set BNC of INPUT SELECT on the OPTION menu to PC RGB when using the PC RGB input terminals. • Select the audio input terminal to be used in PC RGB of AUDIO SELECT on the OPTION menu. 15. AV component input terminals • Set BNC of INPUT SELECT on the OPTION menu to AV COMPONENT when using the AV component input terminals. • Select the audio input terminal to be used in AV COMPONENT of AUDIO SELECT on the OPTION menu. 16. AV video input terminal • Select the audio input terminal to be used in AV VIDEO of AUDIO SELECT on the OPTION menu. 17. AV S-video input terminal • Select the audio input terminal to be used in AV S-VIDEO of AUDIO SELECT on the OPTION menu. Multiple monitor connection The monitors can be aligned and used as a large screen. [Example] Remote control sensor box (Supplied with the PN-ZR01 (optional)) Second monitor Secondary (Expansion unit) ID No.: 2 Third monitor Secondary (Expansion unit) ID No.: 3 First monitor Primary (Main unit) ID No.: 1 Fourth monitor Secondary (Expansion unit) ID No.: 4 TIPS • Connect the RS-232C cables in order, starting with the first monitor (primary monitor). If monitors are connected in a different order they may not be operable. • Always install the remote control sensor box on the primary monitor. ■ Connection with video cable May vary depending on the system being used. If using the PC/AV DVI-D terminal, up to 5 monitors can be connected in a daisy chain. (When the PN-ZB02 is attached) First monitor Second monitor PC/AV DVI-D input terminal PC/AV DVI-D PC/AV DVI-D output terminal input terminal Digital signal (DVI) cables (commercially available) To PC digital RGB output terminal shows the signal flow 13 E