Sharp PN-V600 Operation Manual - Page 55

Specifications

Get Sharp PN-V600 PDF manuals and user guides View all Sharp PN-V600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Specifications nPN-V600 Product Specifications Model PN-V600 LCD component 60" Class [60 inch (152.4cm) diagonal] TFT LCD Max. resolution (pixels) 1366 x 768 Max. colors Approx. 16.77 M colors Pixel pitch 0.973 mm (H) × 0.973 mm (V) Viewing angle 176° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 52-5/8 x 29-7/16 (1328.8 x 747.1) Computer input signal Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75 Ω] Sync signal Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital HDMI x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1 Audio 3.5 mm mini stereo jack x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB02 PC/AV (optional) is PC attached AV Digital DVI-D 24 pin (HDCP compatible) x 1 Analog BNC *1*2 x 1 Composite video BNC x 1 S-video x 1 Component BNC (Y, Cb/Pb, Cr/Pr) *1 x 1 Audio RCA pin (L/R) x 2 Output terminals Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 When PN-ZB02 PC/AV Digital (optional) is External speaker attached DVI-D 24 pin x 1 10 W + 10 W [6 Ω] LAN terminal [When PN-ZB02 (optional) is attached] 10 BASE-T/100 BASE-TX Power requirement AC 100 V - 240 V, 50/60 Hz Operating temperature *3 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 305 W / 1.0 W / 1.0 W (maximum / input signal waiting mode *4 / standby mode *5) Power consumption [PN-ZB02 (optional)] 310 W Dimensions (excluding protrusions) inch (mm) Approx. 52-5/8 (W) x 5-7/8 (D) x 29-11/16 (H) (1335.9 x 149.3 x 754.2) Weight Weight [PN-ZB02 (optional)] lbs. (kg) Approx. 90.4 (41) lbs. (kg) Approx. 1.102 (0.5) *1 Cannot be used simultaneously. *2 Does not support plug and play. *3 Temperature condition may change when using the display together with the optional equipments recommended by SHARP. In such cases, please check the temperature condition specified by the optional equipments. *4 When AUTO INPUT CHANGE is set to OFF. *5 When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. nPN-ZR01 (optional) Product Specifications Model Remote control sensor box dimensions Remote control sensor box weight PN-ZR01 inch (mm) Approx. 1-3/8 (W) x 7/8 (D) x 5-1/8 (H) (34.2 x 23 x 130) lbs. (kg) Approx. 0.220 (0.1) 55 E

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
55
E
Specifications
n
PN-V600 Product Specifications
Model
PN-V600
LCD component
60" Class [60 inch (152.4cm) diagonal] TFT LCD
Max. resolution
(pixels)
1366 x 768
Max. colors
Approx. 16.77 M colors
Pixel pitch
0.973 mm (H) × 0.973 mm (V)
Viewing angle
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area inch
(mm)
52-5/8 x 29-7/16
(1328.8 x 747.1)
Computer input signal
Digital (DVI 1.0 standard-compliant), Analog RGB (0.7 Vp-p) [75
Ω
]
Sync signal
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
VESA DPMS, DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB02
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*
1
*
2
x1
AV
Composite video
BNC x 1
S-video
x1
Component
BNC (Y, Cb/Pb, Cr/Pr) *
1
x1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB02
(optional) is
attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
10 W + 10 W
[6
Ω
]
LAN terminal
[
When PN-ZB02 (optional) is attached
]
10 BASE-T/100 BASE-TX
Power requirement
AC 100 V - 240 V, 50/60 Hz
Operating temperature
*
3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption
(maximum / input signal waiting mode
*
4
/ standby
mode
*
5
)
305 W / 1.0 W / 1.0 W
Power consumption [PN-ZB02 (optional)]
310 W
Dimensions (excluding protrusions)
inch (mm)
Approx.
52-5/8 (W) x 5-7/8 (D) x 29-11/16 (H) (1335.9 x 149.3 x 754.2)
Weight
lbs. (kg)
Weight
[PN-ZB02 (optional)]
lbs. (kg)
Approx.
90.4 (41)
Approx.
1.102 (0.5)
*1
Cannot be used simultaneously.
*2
Does not support plug and play.
*3
Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
*4
When AUTO INPUT CHANGE is set to OFF.
*5
When STANDBY MODE is set to STANDARD. When STANDBY MODE is set to LOW POWER: 0.5 W.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
n
PN-ZR01 (optional) Product Specifications
Model
PN-ZR01
Remote control sensor box dimensions
inch (mm)
Approx.
1-3/8 (W) x 7/8 (D) x 5-1/8 (H) (34.2
x
23
x
130)
Remote control sensor box weight
lbs. (kg)
Approx.
0.220 (0.1)