Sharp PN-V600 Operation Manual - Page 37

Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 32.) Direction: W When the "Parameter" is set in the parameter field (see page 32), the command functions as described under "Control/Response Contents". R The returned value indicated under "Reply" can be obtained by setting "????", " ?" or "???+" (repeater control) in the parameter field (see page 32). Parameter: Parameter field (See page 32.) Reply: Response (Returned value) *1: "●" indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting. "○" indicates a command which can also be used in power standby mode when STANDBY MODE is set to STANDARD. "-" indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting. *2: PN-ZB02 (optional) limitations (A) When PN-ZB02 (optional) is not attached, (B) When PN-ZB02 (optional) is attached. ○ : The command can be used. - : Error (ERR) Power control/Input mode selection Function POWER CONTROL Command Direction POWR W R Parameter 0 1 INPUT MODE SELECTION INPS W 0 1 2 3 4 6 7 8 9 10 R Reply Control/Response contents *2 *1 (A) (B) Switches to standby mode. Returns from standby mode. 0 Standby mode 1 Normal mode ●○○ 2 Input signal waiting mode Toggle change for input mode. Terminals not selected in INPUT SELECT cannot be selected. ○○ PC DVI-D "ERR" when AV DVI-D is selected for DVI of INPUT SELECT. PC D-SUB AV COMPONENT "ERR" when PC RGB is selected for BNC of INPUT SELECT. AV VIDEO PC RGB "ERR" when AV COMPONENT is selected for BNC of INPUT SELECT. AV DVI-D "ERR" when PC DVI-D is selected for DVI of INPUT SELECT. AV S-VIDEO AV HDMI "ERR" when PC HDMI is selected for HDMI of INPUT SELECT. PC HDMI "ERR" when AV HDMI is selected for HDMI of INPUT SELECT. ○○ 1 PC DVI-D 2 PC D-SUB 3 AV COMPONENT 4 AV VIDEO 6 PC RGB 7 AV DVI-D ●○○ 8 AV S-VIDEO 9 AV HDMI 10 PC HDMI 37 E