Sharp PN-V601 Sharp Digital Signage Software (SDSS™) Operation Manual - Page 80
●Adding/editing a group
UPC - 074000047068
View all Sharp PN-V601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Panel Management and Option Managing panels 4) MAC address Set the MAC address for the target PC if you want to turn it on from the controller PC. 5) FTP Setting Enter the "User name" (within 30 alphanumeric characters), "Password" (within 30 alphanumeric characters), and "Port number" (1-32000) that you set for the target PC FTP settings. • FTP settings for adding a panel can be set in advance. (Fp.83) • If you have installed the Viewer Version, a unique FTP Server will be installed, and started as a service. The default TCP/IP port numbers are 20 and 21. If this port number is already used by another service, change the port number. The FTP settings of the target PC Client Scheduler must use the same port number. (Fp.101) 6) Power Control If you want to turn the power of the target PC on or off at a specified time, select the "Specify to power on/off the panel through the server at the designated time", and set the "Time to start" and "Time to end". (Times can be specified in increments of 5 minutes) 3. Click [Add] or [Cancel]. ●Adding/editing a group 1. To add a group, click [Add Group]. The [Add Group] dialog box will appear. To edit a group, select the group you want to edit and click [Edit]. The [Edit Group] dialog box will appear. • A group can be created within a group • It is not possible to create two or more groups with the same name. 2. Select the parent group. 3. Enter a "Group name". (Names must be within 50 characters) 4. Click [Add] or [Cancel]. 80