Singer One Instruction Manual 7 - Page 20

If O STRAIGHT STITCHES A Straight stitch is most frequently used for every aspect of sewing. Learn the correct method of your machine following the steps below. 1. SETTINGS 2. Pull both threads under the Stitch indicator - A presser foot toward the back Stitch length - 2 - 3 of the machine. Thread tension - 3 3. Place the fabric under the Raise the take-up lever to its presser foot and lower the highest position by turning the presser foot lever. hand wheel toward you. 4. Turn the hand wheel toward D. Take-up lever Top thread tension control you until the needle enters the fabric. © Stitch width/needle position control Indicator Stitch selector Hand wheel © Stitch length control 8 Power/light switch Reverse stitch lever 0 Presser foot lever 2.N3 5. a. Start to sew stepping on the foot control. b. Guide the fabric gently with your hand. c. When you reach the end of the fabric, stop the machine by releasing the foot control. 6. a. Turn the hand wheel to raise the needle. b. Raise the presser foot by pushing the lever up. c. Use the thread cutter above the presser foot to cut off excess threads. d. Pull both threads under and to the back of the presser foot, leaving 4 inches (10 cm) clear. Needle position for straight stitching C) Straight stitch at left needle position with needle position control at L. if Straight stitch at middle needle position with needle position control set at M. ® Straight stitch at right needle position with needle position control at R. 18