Sony Ericsson K700i User Guide - Page 25

Calling Before voice dialling You must first activate the voice dialling function and record your voice commands. An icon appears next to a phone number that has a voice command. To activate voice dialling and record names 1 } Settings } the General tab } Voice control } Voice dialling } Activate } New voice and select a contact. 2 If the contact has more than one number, use and to view the numbers. Select the phone number to which you want to add the voice command. Now you are going to record a voice command such as "John mobile" for the phone number you selected. 3 Instructions appear. Lift the phone to your ear, wait for the tone and say the command that you want to record. The voice command is played back to you. 4 If the recording sounds ok } Yes. If not } No and repeat step 3. 5 To record another voice command for a contact } New voice again and repeat steps 2-5 above. Caller name You can choose whether you want to hear the recorded contact name when you receive a call from that contact. To turn the caller name On or Off } Settings } the General tab } Voice control } Play caller name. Voice dialling You can voice dial by saying a pre-recorded voice command. Start voice dialling from standby using the phone, a portable handsfree, a Bluetooth headset or by saying your magic word. To make a call from the phone 1 From standby, press and hold one of the volume buttons. 2 Lift the phone to your ear, wait for the tone and say the name you recorded earlier, for example "John mobile". The name is played back to you and the call is connected. To make a call with a handsfree From standby, press the handsfree button, or Bluetooth headset button. This is the Internet version of the user's guide. © Print only for private use. 25