Sony BVME250A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 102
Capturing the Picture of the HD Signal (HD Frame Capture
View all Sony BVME250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Chapter 4 Operations 5 Press the ENTER (Ent) button. Part inside the cursor is magnified. You can move the position of the magnified picture with the PHASE knob or CHROMA knob. You can change the magnification ratio with the UP or DOWN button. You can also change the boundary line color. For details on changing the boundary line color, see "Pixel Zoom Setting" (page 72) of the Function Setting menu. Press the MENU button of the controller to return to the cursor display. To end the pixel zoom operation When the cursor is displayed or the picture is magnified, press the Pixel Zoom button of the controller. Capturing the Picture of the HD Signal (HD Frame Capture) The frame picture of the 3G/HD-SDI input signal is captured and saved as a picture file in the "Memory Stick". This is used to confirm the color tone and picture angle of the current scene and recorded scene, or as the reference picture to adjust the monitor. To save the captured frame, we recommend using "Memory Stick PRO (High-Speed)" or "Memory Stick PRO Duo (High-Speed)". Notes • Use the controller with software version 1.6 or higher to use the HD Frame Capture function. • The file is saved in TIFF. The file size is a maximum of 13 MB. • The picture file is captured or loaded without deterioration. • The saved file may not be opened due to the PC application used. • The HD Frame Capture function is effective only for the 3G/HD-SDI signal. • The interlace input signal is captured in each frame (first field (F=0) and second field (F=1)). • The frame is not captured in the following cases: - When Side by Side, Wipe, Butterfly or Blending is set to On - When Pixel Zoom is set to on - When the internal signal is displayed - When the input signal has no sync signal - When the captured frame is displayed • The HD Frame Capture function is not available on BKM-15R and BVM-A14F5. To capture 1 Insert the "Memory Stick" into the Memory Stick insertion slot of the controller. For details on the "Memory Stick", see "Inserting/Ejecting the "Memory Stick"" on page 146. 2 Display the picture and press the CAPTURE button of the controller at the point on the picture to be captured. The captured still picture appears on the display. 102 Capturing the Picture of the HD Signal (HD Frame Capture)