Sony BVME250A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 107
Copying the Setting or Adjustment Value to Another Monitor
View all Sony BVME250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
With serial number 7300001 or higher: - Difference - Four other display modes • To assign Checkerboard or L/R Switch to a function button of the controller, use the controller with software version 1.5 or higher. To assign Difference, Horopter Check or Flip H to a function button of the controller, use the controller with software version 1.6 or higher • If you change the channel when the 3D signal analyzing function is On, it is switched to Off. • If you display the Picture&Picture image when the 3D signal analyzing function is On, it is switched to Off. • If the input signal system is changed when the 3D signal analyzing function is On, the 3D video image may not be displayed correctly. • The 3D signal analyzing function cannot be set to On in the following cases: - When the option port number in which the BKM- 250TG is installed is not selected in Input Port of the Channel Configuration menu - When dual-link display is used - When the internal signal is displayed - When a captured frame is displayed - When Side by Side, Wipe, Butterfly or Blending is set to On • The display of the 3D signal analyzing function may not be performed correctly when H Delay is set to On. • If saving is performed in HD Frame Capture when a 3D signal analyzing function other than Flip H is in use, the function is deactivated and the normal display is restored. Copying the Setting or Adjustment Value to Another Monitor You can save the setting or adjustment value in the "Memory Stick" and copy it to another monitor. 1 Insert the "Memory Stick" into the Memory Stick insertion slot of the controller. For details on the "Memory Stick", see "Inserting/Ejecting the "Memory Stick"" on page 146. 2 Select Memory Stick in the Save To menu (page 87) of the File Management menu, and then select New Name or the existing file name. When you select New Name, the display to create a new name appears. Display example iiiFile Management Save to Memory Stick New Name File1 File2 File3 Chapter 4 Operations Enter a new name (1 to 20 characters). When the existing file name is selected, the display to confirm a file name appears. Display example iiiiFile Management Save to Memory Stick FileX Overwrite this file? OK: ENTER Cancel: MENU 107 Copying the Setting or Adjustment Value to Another Monitor