Sony BVME250A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 104
Displaying the Audio Level Meter
View all Sony BVME250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Chapter 4 Operations Blanking-Half or Aspect Blanking-Black to a function button of the controller. Displaying the Audio Level Meter The audio level of the embedded audio signals superimposed on the SDI signals is displayed by installing the optional input adaptor (BKM-250TG). Note As the audio level meter is superimposed on the video signal, the audio level meter may be invisible partially because of the scan mode setting of the monitor. 1 Input the SDI signal. 2 Select the channel. 3 Set the audio level meter in the Audio Level Meter menu (page 84) of the On Screen Set menu of the System Configuration menu. To set the audio channel Set in the Audio CH menu. CH1-CH8: Selects when the channel 1 to 8 is selected. CH9-CH16: Selects when the channel 9 to 16 is selected. To set the display position Set in the Position menu. Bottom: Displays at the bottom of the window. Top: Displays at the top of the window. To set the transparency of the background Set in the Transparency menu. Black: Sets the background in black. Half: Sets the background in translucence. To set the peak hold Set in the Peak Hold menu. Off: The peak hold does not function. Auto: The peak hold is automatically canceled after about 1 second. Manual Reset: The peak hold is canceled manually. To cancel the peak hold, select ALM Hold Reset (page 79) in the Function Switch menu of the Function Setting menu or set ALM Hold Reset to on by pressing the ALM Hold Reset button1) of the controller. 4 Set Audio Level Meter (page 79) to On in the Function Switch menu of the Function Setting menu or by pressing the Audio Level Meter button1) of the controller. The audio level meter is displayed. 104 Displaying the Audio Level Meter