Sony BVME250A User Manual (Operating Instructions - BVM-E250A / BVM-E170A) - Page 11
Screen saver, Variable picture adjustment functions, ASC CDL and User LUT functions, Other features - digital camera
View all Sony BVME250A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Chapter 1 Overview The left (L) and right (R) 3D video signals are displayed in a checkerboard pattern on the screen. This display is useful for comparing the luminance or color settings of neighboring L and R images. L/R switching display (with serial number 7100001 or higher): The dual-stream left (L) and right (R) 3D video signals are alternately displayed on the screen. This display is useful for comparing the color or brightness of the L and R signals, as a black frame is not inserted when the two signals are switched. Horopter check display (with serial number 7100001 or higher): Either left (L) or right (R) 3D video signals, or both L and R signals are displayed in monochrome mode. This display is useful for checking a subtle depth of a subject located in the boundary plane of the screen, that is, whether it is near or far from the screen surface. Horizontal flip display (with serial number 7100001 or higher): The input 3D video signals whose left (L) or right (R) signal has been inverted horizontally by a half-mirror type 3D rig are displayed as non-inverted images. Other features • The color temperature is selectable from D65, D93, D61, D55, D-Cine and User. • Built-in test pattern for 100% white signal, 20% gray signal, 0% black signal, PLUGE (Picture Line Up Generation Equipment) signal, color-bar signal, 5 step gray scale signal and ramp signal. • Chroma Up function that increases the chroma setting by 12 dB. • Blue only function and RGB cut off function to monitor signal noise. • A parallel remote of the contact point control connector is equipped. Note The horizontal flip display function of this monitor inverts the input signals to display them. Since the internal sync is applied to any signal delayed by the inversion, there is a time lag between input and the displayed image. Screen saver When a nearly still image is displayed continuously for 10 minutes or more, the screen saver starts automatically to reduce the brightness of the screen to prevent burn-in. Variable picture adjustment functions Auto chroma, phase and matrix adjustment functions are equipped. ASC CDL and User LUT functions The ASC CDL (American Society of Cinematographers Color Decision List) function and the User LUT (User Look-up Table) function allow you to change color representation of the monitor during production of digital cinemas, recorded television shows, and commercials. You can view the camera images being shot on the set, with the color representation applied, using the ASC CDL function. You can also reproduce a pseudo image that is printed on film, using the User LUT function. These functions facilitate the decision process of creative color representation or improve the workflow between onlocation and post-production work. These functions require special third-party software. For details, contact your Sony representative. 11 Features