Sony CCD-TRV210 Operating Instructions - Page 23
To display the screen indicators - Display function, Playing back a tape, Using the data code function
View all Sony CCD-TRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Playing back a tape To display the screen indicators - Display function Press DISPLAY on your camcorder or the Remote Commander supplied with your camcorder. The indicators appear on the LCD screen. To make the indicators disappear, press DISPLAY again. DATA CODE DISPLAY Playback - Basics Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code function). Press DATA CODE on your camcorder or the Remote Commander in the play back mode. The display changes as follows: date/time n various settings (SteadyShot, exposure AUTO/MANUAL, white balance, gain, shutter speed, aperture value) n no indicator JUL 4 1999 12:05:56 AM AUTO 60 AWB F1.4 9dB Not to display recording data Set DATA CODE to DATE in the MENU settings (p. 54). The display changes as follows: date/time n no indicator Note on the data code function The data code function works only for tapes recorded in the Digital8 system. Recording data Recording data is your camcorder's information when you have recorded. In the recording mode, the recording data will not be displayed. When you use data code function, bars (-- -- --) appear if: • A blank section of the tape is being played back. • The tape is unreadable due to tape damage or noise. • The tape was recorded by a camcorder without the date and time set. 23