Sony CCD-TRV210 Operating Instructions - Page 65
In the playback mode, Troubleshooting, Symptom, Cause and/or Corrective Actions
View all Sony CCD-TRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Troubleshooting Symptom Cause and/or Corrective Actions A vertical band appears when you shoot a subject such as lights or a candle flame against a dark background. • The contrast between the subject and background is too high. Your camcorder is not a malfunction. A vertical band appears when you shoot a very bright subject. • Your camcorder is not a malfunction. Some tiny white spots appear in the viewfinder or on the LCD screen. An unknown picture is displayed in the viewfinder or on the LCD screen. The picture is recorded in incorrect or unnatural colors. Picture appears too bright, and the subject does not appear in the viewfinder or on the LCD screen. • Slow shutter, low lux or NightShot +Slow shutter mode is activated. This is not a malfunction. • If 10 minutes elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the MENU settings without a cassette inserted, your camcorder automatically starts the demonstration. m Insert a cassette and the demonstration stops. You can also cancel DEMO MODE. (p. 54) • NIGHTSHOT is set to ON. m Set it to OFF. (p. 19) • NIGHTSHOT is set to ON in a bright place. m Set it to OFF, or use the NightShot function in a dark place. (p. 19) Additional Information In the playback mode Symptom Cause and/or Corrective Actions The tape does not move when a video control button is pressed. • The POWER switch is set to CAMERA or OFF. m Set it to VTR. (p. 22) • The tape has run out. m Rewind the tape. (p. 22) The playback picture is not clear or does not appear. • The television's video channel is not adjusted correctly. m Adjust it. (p. 25) There are four horizontal lines on the • The video head may be dirty. picture or the playback picture is not m Clean the heads using the Sony V8-25CLD cleaning clear or does not apeear. cassette (not supplied). (p. 72) No sound or only a low sound is heard when playing back a tape. • The stereo tape is played back with HiFi SOUND set to 2 in the MENU settings. m Set it to STEREO. (p. 54) • The volume is turned to minimum. m Open the LCD panel and press VOLUME +. (p. 22) • AUDID MIX is set to ST2 side in the MENU settings. m Adjust AUDIO MIX. (p. 54) The date search does not work correctly. • The tape has a blank portion in the recorded portion (p. 46) The picturer which is recorded in the • PB MODE is set to H/h in the MENU settings. Digital8 system is not played back. m Set it to AUTO . (p. 54) The date which is recorded in the Hi8/standard 8 system is not played back correctly. • Set PB MODE to H/h in the MENU settings. (p. 54) (Continued on the following page) 65