Sony CCD-TRV210 Operating Instructions - Page 67
Others, Troubleshooting
View all Sony CCD-TRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Troubleshooting Others Symptom Cause and/or Corrective Actions The Remote Commander supplied with your camcorder does not work. • COMMANDER is set to OFF in the MENU settings. m Set it to ON. (p. 54) • Something is blocking the infrared rays. m Remove the obstacle. • The batteries are inserted in the battery holder with the + - polarities incorrectly matching the + - marks. m Insert the batteries with the correct polarity. (p. 81) • The batteries are dead. m Insert new ones. (p. 81) The picture from a TV or VCR does not appear even when your camcorder is connected to outputs on the TV or VCR. • DISPLAY is set to V-OUT/LCD in the MENU settings. m Set it to LCD. (p. 54) The melody or beep sounds for 5 seconds. While charging the battery pack, no indicator appears or the indicator flashes in the display window. • Moisture condensation has occurred. m Remove the cassette and leave your camcorder for at least 1 hour to acclimatize. (p. 71) • Some troubles has occurred in your camcorder. m Remove the cassette and insert it again, then operate your camcorder. • The AC power adaptor is disconnected. m Connect it firmly. (p. 9) • Something is wrong with the battery pack. m Contact your Sony dealer or local authorized Sony service facility. Additional Information 67