Sony CCD-TRV210 Operating Instructions - Page 41
Inserting a scene
View all Sony CCD-TRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Advanced Recording Operations Inserting a scene You can insert a scene in the middle of a recorded tape by setting the start and end points. The previously recorded frames between these start and end points will be erased. Use the Remote Commander for this operation. [a] [b] (1) While your camcorder is in the standby mode, keep pressing EDITSEARCH, and release the button at the insert end point [b]. (2) Press ZERO SET MEMORY. The ZERO SET MEMORY indicator flashes and the tape counter resets to zero. (3) Keep pressing the - Œ side of EDITSEARCH and release the button at the insert start point [a]. (4) Press START/STOP to start recording. The scene is inserted. Recording stops automatically at the tape counter zero point. Your camcorder returns to the standby mode. ZERO SET MEMORY EDITSEARCH Notes • The zero set memory function works only for tapes recorded in the Digita8 system. • The picture and the sound may be distorted at the end of the inserted section when it is played back. If you re-record on the section which contains a non-recorded section The zero set memory function may not work correctly. When START/STOP MODE is set to or 5SEC You cannot use the zero set memory function. 41