Sony CCD-TRV210 Operating Instructions - Page 66
In the recording and playback modes, Troubleshooting
View all Sony CCD-TRV210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Troubleshooting In the recording and playback modes Symptom Cause and/or Corrective Actions The power does not turn on. • The battery pack is not installed, or is dead or nearly dead. m Install a charged battery pack. (p. 8, 9) • The AC power adaptor is not connected to a wall outlet. m Connect the AC power adaptor to a wall outlet. (p. 12) The end search function does not work. •The tape was ejected after recording. •You have not recorded on the new cassette yet. The battery pack is quickly discharged. • The operating temperature is too low. • The battery pack is not fully charged. m Charge the battery pack again. (p. 9) • The battery pack is completely dead, and cannot be recharged. m Replace with a new battery pack. (p. 8) The battery remaining indicator does not indicate the correct time. • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. m Replace with a new battery pack. (p. 8) • The battery is dead. m Use a charged battery pack. (p. 8, 9) The cassette cannot be removed from the holder. • The power source is disconnected. m Connect it firmly. (p. 8, 12) • The battery is dead. m Use a charged battery pack or the AC power adaptor. (p. 8, 9) The { and 6 indicators flash and no functions except for cassette ejection work. • Moisture condensation has occurred. m Remove the cassette and leave your camcorder for at least 1 hour to acclimatize. (p. 71) 66