Sony CMT-NE3 Operating Instructions - Page 23
Tuner, Tape deck, Optional components - md function
View all Sony CMT-NE3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
The sound skips. • Wipe the disc clean (page 26). • Replace the disc. • Try moving the system to a place without vibration (e.g., on top of a stable stand). • Try moving the speakers away from the system, or placing them on separate stands. When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip. Play does not start from the first track. • Press PLAY MODE repeatedly until both "PGM" and "SHUF(FLE)" disappear to return to Normal Play. MP3 audio track cannot be played back (CMTNE5 only). • CMT-NE3 does not play MP3 audio. • Recording was not performed according to the ISO 9660 level 1 or level 2 format, or Joliet in the expansion format. • The MP3 audio track does not have the extension ".MP3". • The data is not stored in MP3 format. • Discs containing tracks other than MPEG1, 2 Audio Layer-3 files cannot be played. MP3 audio tracks take longer to play back than others (CMT-NE5 only). • After the system reads all tracks on the discs, playback may take more time than usual if: - the number of albums or tracks on the disc is very large. - the album and track organization structure is very complex. The album title, track title and ID3 tag do not appear correctly (CMT-NE5 only). • Use a disc that conforms with ISO 9660 level 1, level 2, or Joliet in the expansion format. Tuner Severe hum or noise/stations cannot be received. • Set the proper band and frequency (page 12). • Connect the antenna properly (page 6). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Keep the antennas away from the system and other components. • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. • Try turning off surrounding electrical equipment. A stereo FM program cannot be received in stereo. • Press FM MODE until "STEREO" appears in the display. Tape deck The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them (page 27). • The record/playback heads are magnetized. Demagnetize them (page 27). The tape does not erase completely. • The record/playback heads are magnetized. Demagnetize them (page 27). There is excessive wow or flutter, or the sound drops out. • The capstans in the tape deck are dirty. Clean them using a cleaning cassette (page 27). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized. Demagnetize them (page 27). The tape does not record. • No cassette is loaded. Load a cassette. • The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 27). • The tape has wound to the end. Optional components There is no sound. • Refer to General item "There is no sound." (page 22) and check the condition of the system. • Connect the component properly (page 21) while checking: - if the cords are connected properly. - if the cord plugs are firmly inserted all the way. • Turn on the connected component. • Refer to the operating instructions supplied with the connected component and start playing. • Press FUNCTION repeatedly until "MD" appears (page 21). continued 23GB Troubleshooting