Sony CPD-101VS Operating Instructions (primary manual) - Page 11
Installation
View all Sony CPD-101VS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installation II Step 1: Connect the computer With the computer switched off, connect the video signal cable to the display (VGA) connector on your computer. If your computer supports the DDC plug-and-play standard, this connection will enable DDC communication between the display and the computer. The video signal cable is combined with audio and microphone cables. If your computer is equipped with sound capability, connect the audio (green) and microphone (red) plugs to appropriate jacks located on your computer. 0 Blue (to monitor connector) Green (to LINE OUT \. connector) Red (to microphone connector) .NOM N 000 U e® Fasten the screw of the blue plug. n•Z• 00 Op Computer 09100.°1 911 /' • Gee VNote on handling the video signal cable Do not touch the pins of the video signal cable. 12 Getting Started