Sony DAV-LF10 Operating Instructions - Page 39
Installing the speakers on a, Make sure that the hole on the back of
UPC - 027242667228
View all Sony DAV-LF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Getting Started Installing the speakers on a wall The front speakers can be wall mounted, either vertically or horizontally. To mount the front speakers horizontally, follow the procedure to install the center speaker. 1 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 4 mm (5/32 inch) more than 30 mm (1 3/16 inch) 1 1 4.6 mm (3/16 inch) 1 2 10 mm 2 (13/32 inch) Hole on the back of the front speakers 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the center speaker and the surround speakers 2 Fasten the screws to the wall. The screws should protrude 8 to 10 mm (11/32 to /13 32 inch). For the front speakers 280 mm (11 1/8 inches) 8 to 10 mm (11/32 to 13/32 inch) For the center speaker 280 mm (11 1/8 inches) 8 to 10 mm (11/32 to 13/32 inch) For the surround speakers 8 to 10 mm (11/32 to 13/32 inch) 3 Attach the supplied foot pads to the speakers, and hang the speakers on the screws. Make sure that the hole on the back of the speaker is in the right direction before hanging the speaker. Note If you do not set the speaker correctly, the speaker may fall down and cause injury. continued 39GB