Sony DAV-LF10 Operating Instructions - Page 92
Settings for the Speakers, (SPEAKER SETUP)
UPC - 027242667228
View all Sony DAV-LF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Settings for the Speakers (SPEAKER SETUP) Note Install the cords carefully to avoid stumbling over the cords. This may cause injury. To obtain the best possible surround sound, set for the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the level and the balance of the speakers to the same level. Select [SPEAKER SETUP] in the Setup Display. For details, see "Using the Setup Display" (page 87). The default settings are underlined. SPEAKER SETUP SIZE: DISTANCE: LEVEL: BALANCE: TEST TONE: To return to the default setting when changing a setting Select the item, then press CLEAR. x SIZE If you do not connect center or surround speakers, or move the surround speakers, set the parameters for [CENTER] and [SURROUND] and specify the surround speaker position and height. Since the front speaker and subwoofer settings are fixed, you cannot change them. Position diagram FRONT YES CENTER YES: Normally select this. NONE: Select this if no center speaker is used. SURROUND BEHIND: Select this if surround speakers are located in section B. SIDE: Select this if surround speakers are located in section A. NONE: Select this if no surround speaker is used. SUBWOOFER YES Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings of other speakers, subwoofer may be excessive. x DISTANCE The default distance setting for the speakers in relation to the listening position is shown below. When you set the distance using the Quick Setup (page 34), the settings is automatically displayed. 1.6m (5ft) 1.6m (5ft) 1.6m (5ft) 1.6m (5ft) 1.6m (5ft) 92GB A B 90 A 45 B 20