Sony DAV-LF10 Operating Instructions - Page 79
Using the SONY TV DIRECT (THEATRE SYNC) Function, Other Operations
UPC - 027242667228
View all Sony DAV-LF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Other Operations Controlling the TV You can control your TV using the buttons below. By pressing TV [/1 TV/VIDEO TV VOL +/- TV CH +/- You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. Adjust the TV volume. Select the TV channel. Using the number buttons for controlling the TV When you set the remote to the TV mode, you can use the number buttons for controlling the TV. Press the TV button. The TV button turns red and the remote is set to the TV mode. You can select the TV channels by using the number buttons. >10 is for selecting the channel number greater than 10. To cancel the TV mode, press the TV button again. Notes • Depending on the TV, you may not be able to control your TV or to use some of the buttons above. • The TV button turns off when you do not operate the remote for 10 seconds. Tip Depending on the TV manufacture, the following method also works. Press >10, then the number. (For example, for channel 25, press >10, then 2 and 5.) Using the SONY TV DIRECT (THEATRE SYNC) Function This function allows you to turn on your SONY TV and this system, change the system mode to "DVD," and then switch the TV's input source you set with one button push. SONY TV DIRECT (THEATRE SYNC) TV/VIDEO Number buttons TV button TV CH + With cover opened. Preparation Register the TV's input source connected to this system. Press and hold TV/VIDEO while entering the code for the TV's input source to connect this system (see table below) using the number buttons. The TV's input source is selected. When you successfully set the TV's input source code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes five times quickly. continued 79GB