Sony DAV-LF10 Operating Instructions - Page 80
Operation, The transmit time from the remote is selected.
UPC - 027242667228
View all Sony DAV-LF10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
By pressing Number TV/VIDEO 0 1 2 3 4 5 6 7* 8* TV's input source No input source (Default) VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 VIDEO6 COMPONENT1 INPUT COMPONENT2 INPUT * Except for North American models. Operation Point the remote at the TV and on the remote sensor, then press SONY TV DIRECT (THEATRE SYNC) once. While transmitting the code from the remote, the TV button flashes. If this function does not work, change the transmit time. The transmit time varies depending on the TV. To change the transmit time Press and hold TV CH + while entering the code for transmit time (see table below) using the number buttons. The transmit time from the remote is selected. If you successfully set the transmit time code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes five times quickly. By pressing Number Transmit time TV CH+ 1 0.5 (Default) 2 1 3 1.5 4 2 5 2.5 6 3 7 3.5 8 4 Notes • This function is only for SONY TVs. (This function may not work on some SONY TVs.) • If distance between TV and this system is too far, this function may not work. Install the system near the TV. • Keep the remote pointed in the direction of the TV and this system while the TV button is flashing. 80GB