Sony DAV-LF10 Operating Instructions - Page 63

Sound Adjustments x When playing a DVD-RW The types of sound tracks recorded on a disc are displayed. The default setting is underlined. Example: • 1: MAIN (main sound) • 1: SUB (sub sound) • 1: MAIN/SUB (Dual Mono) Notes • Not all discs give you the three choices above when in Super Audio CD playback. It all depends on the layer configuration of the Super Audio CD to be played. • When playing a Super Audio CD in the 2 channel playback area or the 2 CHANNEL STEREO mode, the POWER/ON LINE indicator of the surround amplifier turns red. 4 Press ENTER. To turn off the Control Menu Press DVD DISPLAY repeatedly until the Control Menu is turned off. Notes • For discs not in multiple audio format, you cannot change the sound. • During DVD playback, the sound may change automatically. Tip You can select [AUDIO] directly by pressing AUDIO. Each time you press the button, the item changes. Displaying the audio information of the disc (DVD VIDEO only) When you select [AUDIO], the channels being played are displayed on the screen. For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD. Depending on the DVD, the number of recorded channels may differ. Current audio format* DVD 1 2 ( 2 7 ) TITLE12 DVD 1 8 ( 3 4 ) T 1:32:55 1: ENGLISH PROGRAM FORMAT DOLBY DIGITAL 3/2.1 * [PCM], [MPEG], [DTS], or [DOLBY DIGITAL] is displayed. For [DOLBY DIGITAL], the channels in the playing track are displayed numerically as follows: For Dolby Digital 5.1 ch: Surround component 2 DOLBY DIGITAL 3 / 2 . 1 Front component 2 + Center component 1 LFE (Low Frequency Effect) component 1 The display examples are as follows: • PCM (stereo) PROGRAM FORMAT PCM 48kHz 24bit • Dolby Surround PROGRAM FORMAT DOLBY DIGITAL 2/0 DOLBY SURROUND continued 63GB