Sony DAV-S300 Operating Instructions - Page 11

Getting Started TV and Video Component Hookups Required cords Video cord for connecting a TV monitor (supplied) Yellow Yellow Audio/video cords (not supplied) When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the components. Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) Jacks for connecting video components Connect a TV monitor VCR Digital satellite receiver To the MONITOR OUT jack VIDEO 1 jacks VIDEO 2 jacks z When using the S-video jack instead of the video jacks Your TV monitor must also be connected via an S-video jack. Svideo signals are on a separate bus from the video signals and will not be output through the video jacks. Note The VIDEO 1 AUDIO OUT L/R jacks output the same signal as the front L/R speakers. When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks. FM 75Ω COAXIAL AM VIDEO OUT VIDEO IN VIDEO IN VIDEO AUDIO OUT AUDIO IN AUDIO IN L L DIGITAL IN R R OPTICAL S VIDEO (DVD ONLY) FRONT R CENTER FRONT L REAR R WOOFER IMPEDANCE USE 3Ω REAR L IN OUT INPUT OUTPUT VIDEO VIDEO IN OUT AUDIO AUDIO IN OUT L R OUT OUTPUT VIDEO OUT AUDIO OUT L R OUT OUTPUT OPTICAL IN INPUT VIDEO IN VCR Digital satellite receiver TV monitor If you connect a digital satellite receiver with the OPTICAL jack The digital satellite receiver can be connected to the OPTICAL jack besides the VIDEO IN and AUDIO IN L/R jacks of the system. The system can input both the digital and analog signals. The digital signal has priority to be input. If the digital signal ceases, the analog signal will be input after two seconds. If you connect a digital satellite receiver without the OPTICAL jack Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the system. 11