Sony DAV-S300 Operating Instructions - Page 49
Settings for Sound (AUDIO SETUP), Settings for Speakers (SPEAKER SETUP), Settings and Adjustments
View all Sony DAV-S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Settings for Sound (AUDIO SETUP) Select "AUDIO SETUP" after pressing DVD SETUP. "AUDIO SETUP" allows you to select the sound track. The default settings are underlined. AUDIO SETUP TRACK SELECTION: OFF To set, press , then ENTER . To quit, press SDEVTDUSPET.UP . xTRACK SELECTION Gives the sound track which contains the highest number of the channels priority when you play a DVD on which multiple audio formats are recorded. If multiple audio channels are recorded in PCM, DTS or Dolby Digital format, the higher-numbered channel audio recorded in PCM, DTS or Dolby Digital format is played. • OFF : No priority given. • AUTO : Priority given. Notes • When you set this item to "AUTO," the language may change depending on the "AUDIO" settings in "LANGUAGE SETUP." The "TRACK SELECTION" setting has higher priority than that of "AUDIO" settings in "LANGUAGE SETUP" (page 44). • If PCM, DTS and Dolby Digital sound tracks have the same number of the highest channels, the system selects PCM, DTS and Dolby Digital sound tracks, in this order. • Depending on the DVD, the audio with priority may be predetermined. In this case, you cannot give priority to the DTS or Dolby Digital format by selecting "AUTO." Settings for Speakers (SPEAKER SETUP) Select "SPEAKER SETUP" after pressing DVD SETUP. To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Then use the test tone to adjust the speaker volumes to the same level. SPEAKER SETUP SIZE: DISTANCE: BALANCE: LEVEL: TEST TONE: OFF FRONT: CENTER: REAR: SUBWOOFER: YES YES BEHIND(LOW) YES To set, press , then ENTER . To quit, press SDEVTDUSPET.UP . xSIZE When you do not connect center or rear speakers, or move the rear speakers, set the parameters for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot change them. The default settings are underlined. • FRONT - YES • CENTER - YES: Normally select this. - NONE: If you will not connect a center speaker, select this. • REAR - BEHIND (LOW), BEHIND (HIGH), SIDE (LOW), SIDE (HIGH): Specify the position and height to implement the Digital Cinema Surround modes in the "Virtual Multi Dimension" sound field (p. 20) properly. - NONE: If you will not connect a rear speaker, select this. • SUBWOOFER - YES Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings of other speakers, the subwoofer may output excessive sound. Settings and Adjustments 49