Sony DAV-S300 Operating Instructions - Page 7

Getting Started Getting Started This section describes how to hook up the system to the speakers, a TV monitor with audio/video input jacks and other video component. You cannot connect this system to a TV monitor which does not have a video input connector. Be sure to turn off the power of each component before making the connections. Unpacking Check that you have the following items: • AM loop antenna (1) • FM wire antenna (1) • Speakers (5) • Subwoofer (1) • Speaker cords (5 m x 4, 15 m x 2) • Video cord (1) • Remote commander (remote) RM-SS300 (1) • Size AA (R6) batteries (2) • Foot pads (24) • Speakers - Connection and Installation (card) (1) Inserting batteries into the remote You can control the system using the supplied remote. Insert two size AA (R6) batteries by matching the + and - on the batteries. When using the remote, point it at the remote sensor g on the system. z You can control TVs using the supplied remote See page 51. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with an old one. • Do not drop any foreign object into the remote casing, particularly when replacing the batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you will not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. 7