Sony DAV-S300 Operating Instructions - Page 14
Speaker Setup, Sit at your listening position and select the item - surround sound system
View all Sony DAV-S300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started Speaker Setup For the best possible surround sound all the speakers other than the subwoofer should be the same distance from the listening position (A). However, this system lets you to place the center speaker up to 5 feet closer (B) and the rear speakers up to 15 feet closer (C) to the listening position. The front speakers can be placed from 3 to 50 feet (A) from the listening position. You can place the subwoofer at any position. You can place the rear speakers either behind you or to the side, depending on the shape of your room, etc. When the rear speakers are placed to the side B A A 45° C C 90° Specifying the speaker parameters To obtain the best possible surround sound, first specify the distance of the speakers from your listening position, then set the balance and level. Use the test tone to adjust the speaker volumes to the same level. Details of each item will follow the description of the operation. You may adjust the speaker parameters using SPEAKER SETUP in the setup display (p. 49). Open the cover. AMP MENU TEST TONE on the front panel display. 2 Sit at your listening position and select the item to be set using M/m. • Items set in > - Size of the rear and center speakers - Distance of the front, rear and center speakers - Position and height of the rear speakers 3 Set the parameter using . If you do not operate the remote for a few seconds, the parameter turns off and is stored in the system. 14