Sony DCR-SR200C Handycam® Handbook - Page 120
DCR-SR42/SR62/SR82, DCR-SR200/SR300, The Active Interface Shoe has a safety
View all Sony DCR-SR200C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
DCR-SR42/SR62/SR82: DCR-SR200/SR300: A NIGHTSHOT PLUS switch (27) B A/V OUT jack (35, 45) C REMOTE jack (except for DCR-SR42) Connect other optional accessories. D Lens cover switch (19) E Flash (26) F Remote sensor (except for DCR-SR42) / Infrared port Point the Remote Commander (p. 122) towards the remote sensor to operate your camcorder. G Active Interface Shoe (except for DCR-SR42) The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer to the operating instructions supplied with your accessory for details. The Active Interface Shoe has a safety device for fixing the installed accessory securely. To connect an accessory, press down and push it to the end, and then tighten the screw. To remove an accessory, loosen the screw, and then press down and pull out the accessory. • When you are recording movies with an external flash (optional) connected to the accessory shoe, turn off the power of the external flash to prevent charging noise being recorded. • You cannot use an external flash (optional) and the built-in flash at the same time. • When an external microphone (optional) is connected, it takes precedence over the built-in microphone (p. 25). H Lens (Carl Zeiss Lens) (3) I Built-in microphone (25) An Active Interface Shoe compatible microphone (optional) will take precedence when connected. 120