Sony DCR-SR200C Handycam® Handbook - Page 16

Playback time, DCR-SR42, DCR-SR62/SR82, DCR-SR200 - dcr sr200 handycam station

Page 16 highlights

* Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. b Notes • All times measured with recording mode [SP] under the following conditions: Top: When the LCD backlight turns on. Bottom: When the LCD backlight turns off (except for DCR-SR42). Playback time Approximate time (min.) available when you use a fully charged battery pack. DCR-SR42: Battery pack NP-FH40 (supplied) NP-FH50 NP-FH70 NP-FH100 Playback time 120 140 300 695 DCR-SR62/SR82: Battery pack NP-FH40 (supplied) NP-FH50 NP-FH70 NP-FH100 Playback time* 110 130 280 635 DCR-SR200: Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 Playback time* 125 165 270 615 DCR-SR300: Battery pack NP-FH50 NP-FH60 (supplied) NP-FH70 NP-FH100 Playback time* 120 160 255 590 * When the LCD backlight is on. On the battery pack • Before changing the battery pack, turn the POWER switch to OFF (CHG) and turn off the (Movie) lamp/ (Still) lamp (p. 23). • The CHG (charge) lamp flashes during charging, or Battery Info (p. 14) will not be correctly displayed under the following conditions: - The battery pack is not attached correctly. - The battery pack is damaged. - The battery pack is worn-out (For Battery Info only). • The power will not be supplied from the battery as long as the AC Adaptor is connected to the DC IN jack of your camcorder or the Handycam Station, even when the power cord is disconnected from the wall outlet. • When attaching an optional video light, it is recommended that you use an NP-FH70/FH100 battery pack (except for DCR-SR42). • We do not recommend using an NP-FH30, which only allows short recording and playback times, with your camcorder. On the charging/recording/playback time • Times measured when using the camcorder at 25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is recommended). • The available recording and playback time will be shorter when you use your camcorder in low temperatures. • The available recording and playback time will be shorter depending on the conditions under which you use your camcorder. 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131

16
*
Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
b
Notes
All times measured with recording mode [SP]
under the following conditions:
Top: When the LCD backlight turns on.
Bottom: When the LCD backlight turns off
(except for DCR-SR42).
Playback time
Approximate time (min.) available when
you use a fully charged battery pack.
DCR-SR42:
DCR-SR62/SR82:
DCR-SR200:
DCR-SR300:
*
When the LCD backlight is on.
On the battery pack
Before changing the battery pack, turn the
POWER switch to OFF (CHG) and turn off the
(Movie) lamp/
(Still) lamp (p. 23).
The CHG (charge) lamp flashes during
charging, or Battery Info (p. 14) will not be
correctly displayed under the following
conditions:
The battery pack is not attached correctly.
The battery pack is damaged.
The battery pack is worn-out (For Battery
Info only).
The power will not be supplied from the battery
as long as the AC Adaptor is connected to the
DC IN jack of your camcorder or the Handycam
Station, even when the power cord is
disconnected from the wall outlet.
When attaching an optional video light, it is
recommended that you use an NP-FH70/FH100
battery pack (except for DCR-SR42).
We do not recommend using an NP-FH30,
which only allows short recording and playback
times, with your camcorder.
On the charging/recording/playback time
Times measured when using the camcorder at
25 °C (77 °F) (10 °C to 30 °C (50 °F to 86 °F) is
recommended).
The available recording and playback time will
be shorter when you use your camcorder in low
temperatures.
The available recording and playback time will
be shorter depending on the conditions under
which you use your camcorder.
Battery pack
Playback time
NP-FH40
(supplied)
120
NP-FH50
140
NP-FH70
300
NP-FH100
695
Battery pack
Playback time*
NP-FH40
(supplied)
110
NP-FH50
130
NP-FH70
280
NP-FH100
635
Battery pack
Playback time*
NP-FH50
125
NP-FH60
(supplied)
165
NP-FH70
270
NP-FH100
615
Battery pack
Playback time*
NP-FH50
120
NP-FH60
(supplied)
160
NP-FH70
255
NP-FH100
590