Sony DCR-TRV130 Operating Instructions - Page 27
Playback – Basics, Playing back a tape - playback hi8
UPC - 027242586154
View all Sony DCR-TRV130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
- Playback - Basics - Playing back a tape You cannot play back the tapes recorded in the Hi8 /Standard (analog) system. Your camcorder plays back pictures only in the Digital8 system. You can monitor the playback picture on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder. (1) Install the power source and insert the recorded tape. (2) Set the POWER switch to VCR while pressing the small green button. (3) Open the LCD panel while pressing OPEN. (4) Press m to rewind the tape. (5) Press N to start playback. (6) To adjust the volume, press either of the two buttons on VOLUME. The speaker on your camcorder is silent when the LCD panel is closed. 4 REW 5 PLAY 2 POWER VCR Playback - Basics OFF (CHARGE) CAMERA 3 6 VOLUME 1 To stop playback Press x. When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out [a]. You can adjust the angle of the LCD panel by lifting the LCD panel up by 23 degrees [b]. [a] [b] 23° 27