Sony DCR-TRV730 Operating Instructions - Page 102
Recording an image from a tape as a still, image
View all Sony DCR-TRV730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Recording an image from a tape as a still image Your camcorder can read moving image data recorded on a tape and record it as a still image on a "Memory Stick." Your camcorder can also take in moving image data through the input connector and record it as a still image on a "Memory Stick." Before operation Insert a recorded tape and a "Memory Stick" into your camcorder. (1) Set the POWER switch to VCR. (2) Press N. The image recorded on the tape is played back. (3) Keep pressing PHOTO lightly until the image from the tape freezes. "CAPTURE" appears on the screen. Recording does not start yet. (4) Press PHOTO deeper. The image displayed on the screen will be recorded on the "Memory Stick." Recording is complete when the bar scroll indicator disappears. OFCFR(CHG) 2 REW PLAY FF 1 V POWER E ERMAORY CAM M 3 CAPTURE 4 PHOTO PHOTO 102 Image size of still images Image size is automatically set to 640 × 480. When the acccess lamp is lit or flashing Do not shake or strike the unit. Also do not turn the power off , eject the "Memory Stick" or remove the battery pack. Otherwise, an image data breakdown may occur. If appears on the screen The inserted "Memory Stick" is incompatible with your camcorder because its format does not comform with your camcorder. Check the format of the "Memory Stick." If you press PHOTO lightly in the playback mode Your camcorder stops momentarily. Sound recorded on a tape You cannot record the audio from a tape. Titles superimposed on tapes You cannot record the titles on the "Memory Stick." However, you can record titles which have already been recorded on tapes. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button.