Sony DPT-S1 Installation Guide 1 - Page 10

Right-click [USB Serial Device COMX] for DPT-S1, then click [Update Driver, Click [Browse my

Page 10 highlights

Click the [Details] tab and select [Bus reported device description] from the pull-down list of [Property]. Check that [DPT-S1] is displayed in [Value]. Note Scroll through the pull-down list to find [Bus reported device description] in the middle of the list. Hints • The value of "X" in "(COMX)" varies depending on the computer environment. • If there is more than one [USB Serial Device (COMX)] under [Ports (COM & LPT)], check the COM port used for DPT-S1 as follows:  While displaying the Device Manager screen, disconnect the USB cable of the Digital Paper device from the computer.  Reconnect the USB cable so that a new port is added.  Right-click the new [USB Serial Device (COMX)] and check [Properties], like in step 4 above. 5 Right-click [USB Serial Device (COMX)] for DPT-S1, then click [Update Driver Software...]. 6 Click [Browse my computer for driver software]. ver1.2 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

ver1.2
Click the [Details] tab and select [Bus reported device description] from the pull-down
list of [Property]. Check that [DPT-S1] is displayed in [Value].
Note
Scroll through the pull-down list to find [Bus reported device description] in the middle
of the list.
Hints
The value of “X” in “(COMX)” varies depending on the computer environment.
If there is more than one [USB Serial Device (COMX)] under [Ports (COM & LPT)],
check the COM port used for DPT-S1 as follows:
While displaying the Device Manager screen, disconnect the USB cable of the
Digital Paper device from the computer.
Reconnect the USB cable so that a new port is added.
Right-click the new [USB Serial Device (COMX)] and check [Properties], like in step
4 above.
5
Right-click [USB Serial Device (COMX)] for DPT-S1, then click [Update Driver
Software...].
6
Click [Browse my computer for driver software].
10