Sony DSC R1 Users Guide - Page 118
Warning indicators and messages, Self-diagnosis display, Messages
UPC - 027242679627
View all Sony DSC R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Warning indicators and messages Self-diagnosis display If a code starting with a letter of the alphabet appears, your camera has a selfdiagnosis display. The last two digits (indicated by ss) will differ depending on the state of the camera. If you are unable to solve the problem even after trying the following corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. C:32:ss • There is trouble with your camera's hardware. Turn the power off and on again. C:13:ss • The camera cannot read or write data on the recording medium. Re-insert the recording medium several times. • An unformatted recording medium is inserted. Format the recording medium (pages 76, 78). • The inserted recording medium cannot be used with your camera, or the data is damaged. Replace the recording medium (page 122, t step 3 in "Read This First"). E:61:ss E:91:ss • A camera malfunction has occurred. Reset the camera (page 107), then turn the power on again. 118 Messages If the following messages appear, follow the instructions. E • The battery level is low. Charge the battery pack (t step 1 in "Read This First"). Depending on the conditions of use or the type of battery pack, the indicator may flash even though there are still 5 to 10 minutes of remaining battery time left. For "InfoLITHIUM" battery only • This battery pack is not a "InfoLITHIUM" type. System error • Turn the power off and then on again (t step 2 in "Read This First"). Insert Memory Stick Insert CF Card • Insert the recording medium into the camera before connecting to a PictBridge compliant printer. • Close the "Memory Stick"/CF card cover before making a PictBridge connection or during the connection. No Memory Stick • Insert a "Memory Stick" (t step 3 in "Read This First"). • Set the /CF switch to CF and use a Microdrive/CF card. Reinsert the Memory Stick • Insert the "Memory Stick" correctly. • The inserted "Memory Stick" cannot be used in your camera (page 122). • The "Memory Stick" is damaged. • The terminal section of the "Memory Stick" is dirty.