Sony DSC R1 Users Guide - Page 99
Printing images directly using a PictBridge compliant printer, Stage 1: Preparing the camera
UPC - 027242679627
View all Sony DSC R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Printing images directly using a PictBridge compliant printer Even if you do not have a computer, you can print images shot using your camera by connecting the camera directly to a PictBridge compliant printer. • "PictBridge" is based on the CIPA standard. (CIPA: Camera & Imaging Products Association) In single-image mode You can print a single image on a printing sheet. Stage 1: Preparing the camera Prepare the camera to connect it to the printer with the USB cable. When connecting the camera to a printer that is recognized when [USB Connect] is set to [Auto], Stage 1 (steps 1 - 4) is unnecessary. / button Multi-selector MENU button • It is recommended to use the AC Adaptor to prevent the power from turning off partway through printing. In index mode You can print several images at a reduced size on a printing sheet. You can print a set of either the same images (1) or different images (2). 1 2 1 Press MENU to display the menu. 2 Move the multi-selector to B to select (Setup). 3 Select [ ] (Setup2) by moving to 2 V, then select [USB Connect] by moving to v/V/B. • An index print function may not be provided depending on the printer. • The quantity of images that can be printed as an index image differ depending on the printer. • You cannot print RAW data files. • If the indicator flashes on the screen of the camera for about five seconds (error notification), check the connected printer. 4 Select [PictBridge] by moving to B/v, then press the center of the multi-selector. Printing still images The USB mode is set. 99