Sony DVP-FX1 Operating Instructions - Page 97

Operation 1 Turn on the TV and select the video input. 2 Turn on the AV cordless IR receiver. 3 Set the LINE SELECT switch on the player to OUT. 4 Press POWER to turn on the player. 5 Set the POWER switch on the AV cordless IR transmitter to ON. The POWER indicator lights up. 6 Adjust the angle and direction of the AV cordless IR transmitter to match the AV cordless IR receiver. Place the player directly in front of the TV within the range specified on the right. POWER AV cordless IR receiver 3 m or less, directly in front AV cordless IR transmitter 7 Start playback on the player. 8 Adjust the distance and angle between the AV cordless IR transmitter and the AV cordless IR receiver so that the playback picture appears clearly on the TV. To turn off the equipment Be sure to turn off the AV cordless IR transmitter before you turn off the player. Notes • Do not connect the AV cordless IR receiver to a video deck, or do not use an AV cordless IR receiver built into a video deck. If you do, noise may appear in the picture. • Do not cover the AV cordless IR transmitter and the AV cordless IR receiver with your hands or other objects. • Infrared rays cannot pass through walls or opaque glass. Be sure to place the player in an unobstructed position. Using LASER LINK through glass will shorten the transmission range. • Do not place the player too close to the TV, as this may cause noise and/or beat. • When using the battery pack, picture or sound noise may appear or the transmission range may be shortened if the battery power is low. Use the AC power adaptor or charge the battery pack. Additional Operations 97