Sony EVI D100 Technical Manual - Page 42

Translating Parameters, Zoom speed, Zoom position

Page 42 highlights

CDo3m0m/3a1nMd oLdiset Translating Parameters Zoom speed Cameras EVI-D30/D31 EVI-D100/P Parameters 02h (Min. speed) to 07h (Max. speed) 00h (Min. speed) to 07h (Max. speed) Translation of commands Accepted parameters Translation 00h, 01h Translates to 02h Values greater than 02h Accepts as is Zoom position Cameras EVI-D30/D31 EVI-D100/P Parameters 0000h (WIDE) to 03FFh (TELE) 0000h (WIDE) to 7000h (TELE, digital 4×) Translation of commands Accepted parameters Translation 0000h to 03FFh Translates within a rage of 08D0h to 5700h Focus position Cameras EVI-D30/D31 EVI-D100/P Parameters 1000h (FAR) to 9FFFh (NEAR, 1 cm) 1000h (FAR) to 8400h (NEAR, 10 cm) Translation of commands Accepted parameters Translation Values less than 8400h Accepts as is Values greater than 8400h Translates to 8400h The actual focus position does not match the value that is defined by the D30/D31's parameters. Translation when answering inquiry commands Parameters Translation 1000h to 8400h Sends back parameters as is During the period from the instant the camera accepts the CAM_Focus Direct command at a value grater than 8400h to the instant the camera accepts another command to define the focus position, it sends back the current D30/D31 parameters. Wide D30/D31 D100/P 0 0 8D0 Wide end 370 3FF 4000 5700 Tele end Tele 7000 Digital 4× The EVI-D100/P translates the parameters to let the camera obtain the same zoom position that is defined by the D30/D31's parameter. The digital zoom function is always set to ON. However, when you use the CAM_Zoom Tele/Wide command or the Remote Commander, the available zoom range is equal to the zoom range of the EVID100/P (0000h to 7000h). Translation when answering inquiry commands Parameters Translation 0000h to 7000h Translates within a rage of 0000h to 03FFh The D100/P's parameters are translated to those of the D30/D31. However, even if the zoom position value is less than 08D0h (closer to the wide side), the camera sends back 0000h to the controller. On the other hand, even if that value is greater than 5700h (closer to the telephoto side), the camera sends back 03FFh. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

42
The EVI-D100/P translates the parameters to let the
camera obtain the same zoom position that is defined
by the D30/D31
s parameter.
The digital zoom function is always set to ON.
However, when you use the CAM_Zoom Tele/Wide
command or the Remote Commander, the available
zoom range is equal to the zoom range of the EVI-
D100/P (0000h to 7000h).
Translation when answering inquiry
commands
Parameters
Translation
0000h to 7000h
Translates within a rage of 0000h to 03FFh
The D100/P
s parameters are translated to those of the
D30/D31.
However, even if the zoom position value is less than
08D0h (closer to the wide side), the camera sends
back 0000h to the controller. On the other hand, even
if that value is greater than 5700h (closer to the
telephoto side), the camera sends back 03FFh.
Translating Parameters
Zoom speed
Cameras
Parameters
EVI-D30/D31
02h (Min. speed) to 07h (Max. speed)
EVI-D100/P
00h (Min. speed) to 07h (Max. speed)
Translation of commands
Accepted parameters
Translation
00h, 01h
Translates to 02h
Values greater than 02h
Accepts as is
Zoom position
Cameras
Parameters
EVI-D30/D31
0000h (WIDE) to 03FFh (TELE)
EVI-D100/P
0000h (WIDE) to 7000h (TELE, digital 4
×
)
Translation of commands
Accepted parameters
Translation
0000h to 03FFh
Translates within a rage of 08D0h to 5700h
D30/31 Mode
Focus position
Cameras
Parameters
EVI-D30/D31
1000h (FAR) to 9FFFh (NEAR, 1 cm)
EVI-D100/P
1000h (FAR) to 8400h (NEAR, 10 cm)
Translation of commands
Accepted parameters
Translation
Values less than 8400h
Accepts as is
Values greater than 8400h
Translates to 8400h
The actual focus position does not match the value that
is defined by the D30/D31
s parameters.
Translation when answering inquiry
commands
Parameters
Translation
1000h to 8400h
Sends back parameters as is
During the period from the instant the camera accepts
the CAM_Focus Direct command at a value grater
than 8400h to the instant the camera accepts another
command to define the focus position, it sends back
the current D30/D31 parameters.
7000
0
3FF
Tele
Wide
5700
0
8D0
370
4000
D30/D31
D100/P
Tele end
Wide end
Digital 4
×