Sony HCD-GSX100W Operating Instructions - Page 17

CD/MP3 - Play Other operations To Do this Cancel Program Play Press PLAY MODE in stop mode repeatedly until "PGM" disappears. Check the program Press . or > repeatedly during Program Play. Add tracks or discs to the Perform step 6. end of the program Clear a track or disc from Press CLEAR in stop the end mode. Erase the entire program Press and hold CLEAR in stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press nN in Program Play mode. appears when the total program time exceeds 100 minutes, or when you select a disc track whose number is 21 or over or when you programmed an MP3 audio track. • The programmed disc and track numbers remain until you erase them, so that the system plays only the existing disc and track numbers if you replace discs. However, the disc and track numbers that are not found in the system or on the disc are deleted from the program, and the rest of the program is played in the programmed order. Labeling a disc - Disc Memo You can label up to 60 discs with titles of up to 20 characters. Whenever you load a labeled disc, the title appears in the display. You can also label discs using an optional keyboard (see "Labeling titles through the keyboard" on page 31). Notes • You cannot label a CD-TEXT disc. • To ensure that Disc Memos are not erased from memory, have the system connected to a wall outlet at least once a day. • You can label a disc only during Normal Play (when "1 DISC", "ALL DISCS" or "ALBM" is displayed) in stop mode. 1 Press CD to switch the function to CD. If "SHUF" or "PGM" appears, press PLAY MODE repeatedly until both disappear. 2 Press DISC + or - (or turn DISC SELECT on the unit) until the disc number you want to label appears. 3 Press MENU. 4 Press . or > repeatedly until "NAME IN" appears. 5 Press ENTER. The cursor appears. 6 Turn DISC SELECT on the unit until the character you want appears. You can input the following characters: • Upper cases (A - Z) • Numbers (0 - 9) • Symbols 7 Press M. The character you selected in step 6 stops flashing and the cursor shifts to the right. continued 17GB