Sony HCD-GX8800 Operating Instructions - Page 34

Precautions (continued) When using a tape longer than 90 minutes The tape is very elastic. Do not change the tape operations such as play, stop, and fast-winding etc. frequently. The tape may get entangled in the tape deck. Cleaning the tape heads Clean the tape heads after every 10 hours of use. Make sure to clean the tape heads before you start an important recording or after playing an old tape. Use separately sold dry-type or wet-type cleaning cassette. For details, refer to the instructions of the cleaning cassette. Demagnetizing the tape heads Demagnetize the tape heads and the metal parts that have contact with the tape every 20 to 30 hours of use with a separately sold demagnetizing cassette. For details, refer to the instructions of the demagnetizing cassette. Specifications AUDIO POWER SPECIFICATIONS (MHC-GX8800 USA model only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6-ohm loads, both channels driven, from 120 Hz - 10 kHz; rates 200 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 miliwatts to rated output. Amplifier section MHC-GX8800 Total harmonic distortion Less than 0.1% (6 ohms at 1 kHz, 100 W) MHC-GN900 The following are measured at AC 127V, 60 Hz (Mexican model only) The following are measured at AC 120, 220, 240V 50/60 Hz (except Mexican model) DIN power output (rated) 205 + 205 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 275 + 275 watts (4 ohms at 1 kHz, 10% THD) 34GB MHC-GN800 (HCD-GN800) The following are measured at AC 127V, 60 Hz (Mexican model only) The following are measured at AC 120, 220, 240V 50/60 Hz (except Mexican model) DIN power output (rated) 170 + 170 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 220 + 220 watts (6 ohms at 1 kHz, 10% THD) MHC-GN800 (SS-WG800) The following are measured at AC 127V, 60 Hz (Mexican model only) The following are measured at AC 120, 220, 240V 50/60 Hz (except Mexican model) Continuous RMS power output (reference) 180 watts (8 ohms at 100 Hz, 10% THD) MHC-GN700 The following are measured at AC 127V, 60 Hz (Mexican model only) The following are measured at AC 120, 220, 240V 50/60 Hz (except Mexican model) DIN power output (rated) 160 + 160 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 200 + 200 watts (6 ohms at 1 kHz, 10% THD) MHC-GN600 The following are measured at AC 127V, 60 Hz (Mexican model only) The following are measured at AC 120, 220, 240V 50/60 Hz (except Mexican model) DIN power output (rated) 130 + 130 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 165 + 165 watts (6 ohms at 1 kHz, 10% THD) Inputs GAME (VIDEO): 1 Vp-p, 75 ohms (phono jack) GAME (AUDIO): Voltage 250 mV, (phono jacks) impedance 47 kilohms MD/VIDEO (AUDIO) IN: voltage 450 mV/250 mV, (phono jacks) impedance 47 kilohms MIC: sensitivity 1 mV, (phone jack) impedance 10 kilohms Outputs VIDEO OUT: max. output level 1 Vp-p, (phono jacks) unbalanced, Sync. negative load impedance 75 ohms PHONES: accepts headphones of (stereo mini jack) 8 ohms or more FRONT SPEAKER: accepts impedance of 6 to 16 ohms SURROUND SPEAKER: accepts impedance of (MHC-GN800/GN700/ 24 ohms or more GX8800 only) SUBWOOFER: accept impedance of (MHC-GN800 only) 8 ohms or more MHC-GN800 4-244-569-11 (1)